Portable Multi Gas Detector - X-zone 5800 915MHz, 24Ah Pump | Dräger
Dräger X-zone® 5800State-of-the-art area monitoring: the Dräger X-zone® 5800 in combination with the Dräger X-am® 5000, 5100, and 5600 gas detectors can be used for the measurement of up to six gases. The internal pump and continuous power supply in the explosive area of Zone 0 / C1D1 extend the range of applications in mobile gas detection technology.
Area monitor
Combination with Dräger X-am® 5000, 5100, and 5600 measurement of up to 6 gases
Extensive area/fenceline monitoring up to 25 devices
Option for permanent power supply in explosive areas (zone 1 / C1D1)
Innovative area monitoring
The Dräger X-zone 5800 transforms the Dräger X-am 5000, 5100 and 5600 personal gas detectors into innovative area monitoring devices for a wide range of applications. A patented combination for increased safety, in addition to the personal air monitors carried on the body, these area monitors are positioned where gas hazards are expected.
Clear warning
Even from a distance, the illuminated green LED ring indicates the air is free of monitored toxics and combustible gases. Upon detection of gas hazards, the LED color changes from green to red, providing a clear visual warning that gas is present. Additionally, a loud and highly audible evacuation alarm is emitted. The Dräger X-zone 5800 gas entry location permits gas to diffuse into the Dräger X-am 5000, 5100 and 5600 from all sides.
Wireless fenceline
Up to 25 Dräger X-zone 5800s can be automatically interconnected to form a wireless fenceline. The interconnection of the area monitoring devices allows for rapid establishment of safety networks for larger areas.
A Dräger X-zone 5800 area monitor detecting a gas alarm transmits the alarm signal to all interconnected units. A red flashing alarm in the unit detecting the gas contrasts with alternating red and green flashing alarms of the connected units. This provides simple recognition of alarm status and the actual location of the hazard.
With the corresponding configuration, the maximum gas concentration in the monitored area is shown on the display. Combined with the display of the X-zone ID a clear containment of the hazard area is possible.
Continuous operation of the X-zone for up to 120 hours or even longer
The 24 Ah battery of the Dräger X-zone 5800 provides up to 120 hours of continuous operation up to a complete working week.
The Power Supply Ex is available for continuous use of the X-zone 5800. It offers a 50 m (164 ft) supply from a safe area to a potentially explosive area and is approved for use with the X-Zone 5800 in zone 0 / C1D1 areas.
For safe transport, the cable of the Power Supply X is rolled up on a cable drum with the integrated power supply.
Pump or diffusion mode suitable for your respective application
?The X-zone 5800 offers two options for sampling gas: remote pump from 30 m (98 ft) for Zone 0 or diffusion. The pump or diffusion cover plate can be changed without tools.
Other benefits
360° gas entry
Approval for Ex Zone 0 / C1D1 areas
Individually configurable with the Dräger CC-Vision PC software (e.g. alarm frequency)
Inductive charging station: easy and convenient non-contact charging (outside the Ex-area)
Interfaces
?The interfaces on the back of the device offer the possibility of switching actuators in case of alarms by means of the configurable relay. The interface can also directly forward device data, such as measured values of sensors and alarms, via Modbus protocol. This allows you to integrate the devices into existing evaluation units.
X-zone 5800 mobile gas detectionX-zone 5800 with connection for power supply EXArea monitoring in EX areasMonitoring of the working area
Portable Multi Gas Detector - X-zone 5800 915MHz, 24Ah Pump | Dräger
